Case CX300C, Руководство оператора

Страница: 191 / 288

6 - MAINTENANCE
Environment and ecology
Before carrying out any maintenance operation on this machine and before disposing of used fluids or lubricants,
always think of the environment. Never throw oil or fluid on the ground and never place it in leaking receptacles.
Consult your local ecological recycling center or your CASE CONSTRUCTION Dealer to obtain information on the
correct method of disposing of these lubricants.
Soil, air and water are vital factors of life in general. When legislation does not yet rule the treatment of some of the
substances which are required by advanced technology, sound judgement should govern the use and disposal of
products of a chemical and petrochemical nature.
The following are recommendations which may be of assistance:
• Become acquainted with and ensure that you understand the relative legislation applicable to your country.
• Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, antifreeze, cleaning
agents, etc., with regard to their effect on man and nature and how to safely store, use and dispose of these sub-
stances.
• Local Environmental Agency will, in many cases, be able to help you as well.
Fluid capacities and lubricant specifications
Component Fluid/Lubricant type Capacity
Engine CASE T
UTELA
LE E
NGINE
O
IL
39 l ( 10.3 US gal )
Cooling system CASE A
KCELA
P
REMIUM ANTI
-
FREEZE
30.8 l ( 8.1 US gal )
Fuel system Refer to page 6-5 Reservoir 450 l ( 118.9 US gal )
Total system 300 l ( 79.3 US gal )
Hydraulic system
CASE A
KCELA
H
YDRAULIC
EXCAVATOR FLUID Reservoir 147 l ( 38.8 US gal )
Travel reduction gear CASE AKCELA GEAR 135 EP Per reduction gear 9.1 l ( 2.4 US gal )
CASE AKCELA GEAR 135 EP 6.0 l ( 1.6 US gal )
Swing reduction gear
CASE A
KCELA
251H EP
M
ULTI
-
PURPOSE GREASE
0.8 kg ( 1.8 lb )
Turntable teeth
CASE A
KCELA
251H EP
M
ULTI
-
PURPOSE GREASE
17 kg ( 37.5 lb )
6-9