Safety, general information and standard torque data
2)
Boom position
WARNING
• If the machine has been modified so that the boom position has been lowered, the machine
will not satisfy the ROPS criteria.
• It is necessary to consult with our company if it is possible that the boom's position has been
lowered by modification.
• The extent to which a boom position has moved cannot be determined in the same way for
all machines.
a
Ground point
With the tip of the bucket in contact with the ground surface at maximum work radius, if the position (* in the
diagram) that overlaps with the cab when viewed from the side is markedly lower than that of a standard
machine (standard arm), the machine will not satisfy the ROPS criteria.
Also, with a machine body with a cab mounted that can withstand up to 31 tons, the effect of mounting a
24 ton machine, which is near the restriction weight, and a 21 ton machine to the same cab will not be the
same.
84402832 NA - May 2011
1001-7
Содержание CX250C
