Case 770 EX Скачать руководство пользователя | Manualshive

Страница: 13 / 51

background image

INTRODUCTION

Basic instructions - Important notice regarding equipment servicing

All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.

Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.

The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional,
or local CASE Dealers, reject any responsibility for damages caused by parts and/or components not approved by
the manufacturer, including those used for the servicing or repair of the product manufactured or marketed by the
manufacturer.

In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.

The information in this manual is up-to-date at the date of the publication. It is the policy of the manufacturer for
continuous improvement. Some information could not be updated due to modifications of a technical or commercial
type, or changes to the laws and regulations of different countries.

In case of questions, refer to your Case New Holland Construction Equipments Sales and Service Networks.

48190544 26/09/2017

9

«
...
11
12
13
14
15
...
»

Содержание 770 EX




















































Отзывы:

Нет отзывов

Похожие инструкции для 770 EX

Бренд: New Holland Страницы: 31

Бренд: Barko Страницы: 52

Бренд: Noblelift Страницы: 107

Бренд: Toro Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды