4
SECTION 00 -- GENERAL -- CHAPTER 1
IMPORTANT WARNINGS
The machine is designed and produced exclusively
for agricultural use.
All other use will be considered to be contrary to the
use specified by CNH AMERICA LLC, who cannot be
held liable for damage to property or the machine, or
for personal injuries which may result.
Persons who risk improper use will therefore assume
the responsibility for any consequences arising from
such use.
Compliance
with
the
instructions
for
use,
maintenance and repairs described in this manual,
are the essential preconditions for use specified by
CNH AMERICA LLC.
The machine must only be used, serviced or repaired
by personnel trained in the relevant working methods
and safety regulations and who have been
authorized to work on the machine.
The user must also observe the rules concerning
general safety and accident prevention, including the
Highway Code when driving on public highways.
Any arbitrary modifications made to this machine will
release CNH AMERICA LLC from any liability
resulting from damage or injury.
CNH AMERICA LLC and all its distribution
organizations, inclusive of, but not restrict to,
national, regional or local distributors, cannot be held
liable for damage resulting from the malfunction of
parts and/or components not approved by CNH
AMERICA LLC.
Under no circumstances will a guarantee be issued
for products made or sold by CNH AMERICA LLC
that are damaged as a result of the malfunction of
parts and/or components not approved by CNH
AMERICA LLC.
TO PREVENT ACCIDENTS
Most accidents and personal injuries taking place in
workshops are due from non-observance of some
essential rules and safety precautions.
The possibility that an accident might occur with any
type of machines should not be disregarded, no
matter how well the machine in question was
designed and built.
A wise and careful service technician is the best
precautions against accidents.
Careful observance of this basic precaution would be
enough to avoid many severe accidents.
DANGER
Never carry out any cleaning, lubrication or
maintenance operations when the engine is running.