Engine - Engine and crankcase
Engine - Remove
Magnum 235, Magnum 260, Magnum 290, Magnum 315, Magnum 340, Magnum 370 [ZCRD02588 - ]
Prior operation:
Battery - Disconnect (55.302)
Prior operation:
Side shield - Remove (90.102)
Prior operation:
Hood - Remove (90.100)
Prior operation:
Engine cooling system - Emptying (10.400)
Prior operation:
Air conditioning - Recover (50.200)
NOTE:
During the disassembly of components with O-ring seals, the seals should be discarded and new seal installed
during assembly.
NOTE:
Cap all fittings and plug all lines/hoses as they are disconnected.
1. Disconnect the hydraulic cooling line connection on the
right side (from oil cooler).
NOTE:
Be prepared to collect some hydraulic oil by placing
a pan under the fitting.
RCPH10CCH771AAB
1
2. Disconnect the hydraulic line
(1)
on the left side (to
oil cooler). Disconnect the engine cooling fan drive
harness connector
(3)
3. Disconnect the air conditioning low pressure hose to
line fitting (return from condenser)
(2)
.
4. Remove the bolt securing the harness P-clamp
(4)
.
RCPH10CCH772AAB
2
5. Disconnect the air conditioning high pressure hose to
tube fitting
(1)
.
6. Disengage the hose clamps
(2)
, and disconnect the
cooler hoses
(3) (4)
.
RCPH10CCH773AAB
3
47533562 02/10/2013
10.1 [10.001] / 3
