Cascadia PLE1202709, Руководство по эксплуатации, Страница: 7 / 57

www.cascadiadvrt.com / (888) 421-0050
7
REAR VIEW
1. Camera Input Connectors
Connect cameras to these BNC connectors.
2. Camera Output Connectors (Loop Out)
These BNC connectors supply video signals looped
through the video input connectors.
3. Quad1
Show quad out (Fixed, Rotation) and a slave DVR
on an analogue monitor.
4. Quad2
Show quad out on analogue monitor.
(Fixed, Rotation)
5. Spot
Rotate a camera on an analogue monitor in order.
6. Cascade In/Out (BNC)
Connect with the CASCADE IN/OUT connector of
another DVR for image transmission when using
two or more units of DVR.
7. Audio Input Connectors (AUDIO IN 1 - 4)
Input audio signal supplied from an external
device such as a microphone amplifier.
8. IEEE1394
Connect to an external device like CD/DVD RW.
9. Audio Output Connector (AUDIO OUT)
Connect a speak for audio out.
10. TV
Connect a monitor to BNC connector.
12. S-VHS
Connect a monitor to S-VHS connector.
13. USB (1.1)
Connect USB memory stick for Upgrade.
14. LAN (10/100BASE-T)
Connect this unit to a network compatible with
10BASET or 100BASE-Tx.
15. VGA
Connect a VGA monitor with this connector.
16. RS232 (SERIAL)
Connect a external device that supports this D-
Sub 9-pin connector when controlling this unit.
17. PAL/NTSC
Chooses a PAL/NTSC video signal.
18. PTZ
Connect RS485 compatible combination
cameras with these port.
19. Cascade In/Out (RJ-11)
Connect with the cascade Out connector of
another DVR for command signal when using
two or more units of DVR.
20. RS422
Connect to Keypad.
21. ALARM IN
Connect an external device such as a sensor or
a door switch.
22. ALARM OUT
Connect a control switch when controlling this
unit using an external device, or when
controlling an alarm device such as a buzzer or
a lamp.