OPERATION
Height Adjustment:
-
The top of TUBE A features an adjustable height pole. Make sure that the unit if OFF and has cooled for at least 15
min before attempting to adjust the height. The height of the unit is adjustable from 5.57 ft. – 6.88 ft.
-
To adjust the height of the heater, turn the dial at the top of TUBE A counterclockwise until you can freely move
the smaller HEIGHT ADJUSTMENT TUBE protruding from TUBE A up and down freely. Select the desired height
while holding onto the smaller HEIGHT ADJUSTMENT TUBE protruding from TUBE A and tighten the dial by turning
it clockwise until secure. Once secure, your heater is ready for use.
-
The Cascade 1500-Watt Patio Heater utilizes a drawstring
cord for operation. Follow the steps below to operate the
heater once the unit has been properly assembled:
1)
Plug heater into a wall outlet
2)
Gently pull the drawstring down until a clicking
sound is heard. This will turn the heater ON to
the LOW (750 Watt) heat setting.
3)
To turn the heater to HIGH (1500 Watts), gently
pull the drawstring a second time until a clicking
sound is heard. This will turn the heater to the
HIGH (1500 Watt) setting.
4)
To turn the heater OFF, gently pull the drawstring
while the heater is in the HIGH heat setting. To
turn the heater OFF while it is in the LOW
setting, you will need to gently pull the
drawstring twice. Once to turn the heater to
HIGH and then to turn the heater OFF.
HEATER HEAD
TUBE A
DIAL
HEIGHT ADJUSTMENT TUBE
