Casals LM1600EA Скачать руководство пользователя страница 4

1. Training

• Read the instructions carefully. Be familiar 

with the controls and the correct use of the 
machine.

• Never allow children or people unfamiliar 

with these instructions to use the machine. 
Local regulations can restrict the age of the 
operator.

• Never operate the machine while people, 

especially children, or pets are nearby.

• Keep in mind that the operator or user is 

responsible for accidents or hazards occur-
ring to other people or their property.

2. Preparation

• While operating the machine always wear 

substantial footwear and long trousers. Do 
not operate the machine when barefoot or 
wearing open sandals. Avoid wearing cloth-
ing that is loose fitting or that has hanging 
cords or ties.

• Thoroughly inspect the area where the 

machine is to be used and remove all ob-
jects which can be thrown by the machine.

• Before using, always visually inspect the 

machine to see that the blade, blade bolt and 
the blade assembly are not worn or dam-
aged. Replace worn or damaged compo-
nents in sets to preserve balance. Replace 
damaged or unreadable labels.

• Before use check the supply and exten

-

sion cord for signs of damage or aging. If 
the cord becomes damaged during use, 
disconnect the cord from the supply im-
mediately. 
DO NOT TOUCH THE CORD BEFORE DIS-
CONNECTING THE SUPPLY. 
Do not use the machine if the cord is dam-
aged or worn.

3. Operation

• Operate the machine only in daylight or in 

good artificial light.

• Avoid operating the lawn mower in wet 

grass.

• Always be sure of your footing on slopes.
• Walk, never run.
• Mow across the face of slopes, never up 

and down.

• Exercise extreme caution when changing 

direction on slopes.

• Do not mow excessively steep slopes.
•Use extreme caution when reversing or 

pulling the appliance toward you.

• Stop the blade(s) if the machine has to 

be tilted for transportation, when crossing 
surfaces other than grass, and when trans-
porting the machine to and from the area to 
be used.

• Never operate the machine with defective 

guards or shields, or without safety devices, 
for example deflectors and/or the grass col-
lector, in place.

• Switch on the motor carefully according 

to instructions and with feet well away from 
the blade(s).

• Do not tilt the machine when switching on 

the motor.

• Do not start the machine when standing in 

front of the discharge opening.

• Do not put hands or feet near or under 

rotating parts.
Keep clear of the discharge opening at all 
times.

• Ensure that the lawn mower is switched 

off when moving from one work area to 
another.

• Stop the machine, and remove the plug 

from the socket. Make sure that all moving 
parts have come to a complete stop:
- Whenever you leave the machine,
- Before clearing blockage or unclogging 
chute,
- Before checking, cleaning or working on 
the machine,
- After striking a foreign object. Inspect 
the machine for damage and make repairs 
before restarting and operating the machine,
- If the appliance starts to vibrate abnormally

Содержание LM1600EA













Отзывы: