Casals HAG2000A, Быстрый старт, Страница: 3 / 6

power tools for your application, The correct
power tools will do the job better and safer at
the rate for which it was designed.
• Do not use the power tools or garden power
tools if the switch does not turn it on and off.
Any the power tools or garden power tools that
cannot be controlled with the switch is danger-
ous and must be repaired.
• Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories, or storing the power tools or garden
power tools. Such preventive safety measures
reduce the risk of starting the power tools or
garden power tools accidentally.
• Store out of the reach of children and do not
allow persons unfamiliar with the power tools
or garden power tools or these instructions to
operate the power tools or garden power tools.
Power tools or garden power tools are danger-
ous in the hands Of untrained users.
• Use the power tools or garden power tools, in
accordance with these instructions and in the
manner intended for particular type of power
tools or garden power tools, taking into ac-
count the working conditions and the
work to be performed.
• Use of the power tools or garden power tools
for operations different from intended could re-
sult in a hazardous situation.
• Have your power tools or garden power tools
serviced by a qualified repair person using
only identical replacement parts. This will en-
sure that the safety of the power tools or gar-
den power tools is maintained.
SAFETY RULES FOR HEAT GUN
Attention!
To avoid the danger of
injury, burning:
• .1f danger arises, pull the mains plug immediately out
Of the mains socket.
• Danger of Personal Injury!
• Never use the appliance as a hair dryer.
• Do not direct the heat flow at persons or animals.
• Do not 100k directly into the opening Of the
heat nozzle.
• Danger! DO not touch the hot nozzle. Wear
protective gloves.
• Wear protective glasses!
• Danger Of Fire and Explosion! The appliance
develops very high temperatures.
• If the device is not used carefully, it can
cause a fire or explosion.
• Heating Of plastics, paints. varnishes etc. can
lead to toxic gases that are hazardous to health.
Make sure you always have
adequate ventilation.
• Let the device cool down completely before
you put it into storage.
• Always place your heat gun down on its end,
with the nozzle pointing upwards.
• In addition, you should never leave the device
on while unattended.
• When taking a break from your work, before
carrying out any tasks on the device itself (e.g.
changing the nozzle) or when you are not using
the device, always pull the mains plug out
of the mains socket.
• Do not direct the device at the same spot
for too long.
• Maintain a distance between the jet outlet
nozzle and the work piece or the surface be-
ing heated. An air blockage could lead to over-
heating of the appliance.
• Pay heed to the direct working area and also
to its surroundings.
• Always keep the device clean, dry and free of
oil or grease.
• Never use the device for a purpose for which it
was not intended.
This hot air gun may be used for the following works:
• Removing paint and varnish
• Removing adhesives
• Form and weld certain plastics and derived materials
• Dissolve glued assemblies and residual glue
• Dry surfaces
• Defrost pipes etc
This machine is not for professional use.
The use of this tool not for purposes described in the
manual is strictly prohibited.
Ensure that the mains voltage corresponds to
the voltage on the rating label of the hot air gun.
Before pluging in the hot air gun, ensure that the
switch if off.
The switch has three positions:
• Mode 1 lower temperature and less volume of air
blowing
• Mmode 2 higher temperature and more volume of
air blowing
• 0 Means the tool is off