Casals CID18K-2, Оригинальное руководство пользователя

Страница: 8 / 84

8
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
products, for cleaning the appliance.
- Do not let water or any other liquid get into
the air vents to avoid damage to the inner
parts of the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade and
inexorably affect the duration of the appli
-
ance’s useful life and could become unsafe
to use.
Supplies
- Always use original supplies, designed
specifically for your appliance model.
the chuck. In order to obtain a secure fas
-
tening of the bit, insert the bit as far as you
can into the chuck. Take firm hold of the
back part of the chuck and turn the front
part of the chuck clockwise until it is firmly
closed.
- In order to remove accessories from the
chuck, follow the same steps as indicated
previously but in reverse order
Screwing, drilling/unscrewing:
- To drill or screw, ALWAYS have the direc
-
tion set to clockwise (CW).
- To unscrew, set the direction to counter
clockwise (CCW).
- The appliance should not be in use when
changing the screwing direction.
How to select the direction of the rota
-
tion (Fig A)
- Do not change the direction of the rotation
whilst the tool motor is in operation.
- The appliance has a selector (6), which al
-
lows the direction of rotation to be changed.
Electronic speed control: (Fig A)
- The speed of the appliance can be regu
-
lated according to the pressure exerted on
the on/off switch (7). This function is very
useful, as it makes it possible to adapt the
speed of the appliance to the type of work
that needs to be done.
- If the appliance works continuously at low
speed, working life of the appliance will be
reduced considerably.
Mechanical Speed change (Fig C)
1st speed: Move backwards the selector
(12)
2ond speed: Move forwards the selector
(12)
- The appliance should not be in use when
changing the speed
Select the function (Fig A, C)
Driving
- Turn the selector (10) until the arrow on
the appliance points to ( ).
- Turn the selector (2) from (1) to (21) until
the desired result is obtained.
Drilling
- Turn the selector (10) until the arrow on
the appliance points to ( ).
Drilling with Impact Function
- Turn the selector (10) until the arrow on
the appliance points to ( ).
Use:
- Select the appliance function desired. (2)
- Turn the appliance on, by using the on/
off button (7)
Once you have finished using the appli
-
ance:
- Stop the appliance by releasing the on/off
switch.
- Remove the battery from the appliance if
you are not intending to use the appliance
during an extended period.
- Clean the appliance.
Cleaning
-
Disconnect the appliance from the mains and
allow it to cool before undertaking any clean
-
ing task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.