Casall INFINITY 1.2T, Руководство пользователя

Страница: 49 / 57

Weight setting
When the P3 display on the computer display screen dot matrix area, users press the STOP/ENTER button,
the figure”0.0” and the dot will be flashing where point at WEIGHT. Press the SPEED “UP /DOWN“ button to
input the weight and press the STOP/ENTER button to confirm.
Calories setting
After inputting weight, press the STOP/ENTER button to confirm.
After you have selected “P3-
Target calories program”, the CALORIES display will show the calories setting
“50”, press the SPEED“UP/DOWN” button to adjust target calories, then press “STOP/ENTER” to confirm.
Press the “START” button to initiate the program, P3 – TARGET CALORIES. To increase or decrease the speed
while exercising, press the SPEED “UP and DOWN” button. The target calories will count down from the
Target Calories value, the TIME, DISTANCE will count up from 0, running at an initial speed setting of 3.2KM/
2.0ML.
All exercise figures will be displayed on the computer display screen when you start to do exercise, and the
figures will be scan automatically during exercise. And the speed will be 3.2KM/2.0ML and the incline will
be at “0” And the initial speed will be 3.2KM/2.0ML and the incline will be at “0”
To switch the screen display while exercising, press the “MODE” button to switch the “( PROG. / DIST. ) ,
( PULSE / INCLINE ) , (CAL. / SPD. )”.
Press the “MODE” button first, the
(PROG ) , ( PULSE ) , (CAL. ). will be show on the computer display screen
and present all the time.
Press the “MODE” button second, the ( DIST. ) , ( INCLINE ) , ( SPD. ) will be show on the computer display
screen and present all the time
Press the “MODE” button third, computer display screen figures will come back to scan status automatically
The user may at any time during the workout period alter the speed with SPEED-UP / SPEED-DOWN, angle
with INCLINE-UP / INCLINE-DOWN.
To pause the program while exercising, press the “STOP” button. To resume exercising, press the “START”
button, or press the STOP button again to return to POWER ON MODE. At the end of the program when the
preset “Calories” target has been achieved, the computer will “beep”.
P4 –IENTERVAL INCLINE PROGRAM
Power on the computer, press the STOP/ENTER button, then the IWM will be flashing. Press the SPEED
UP/DOWN button to select the P4(Program 4) , then press the STOP/ENTER button again, computer will go
to P4 procedure
Weight setting
When the P4 display on the computer display screen dot matrix area, users may press the STOP/ENTER
button, the figure”0.0” and the dot will be flashing that point at WEIGHT. Press the SPEED “UP
/DOWN“ button to input the weight and press the STOP/ENTER button to confirm.