Figure 8
8. Attach the door handle (M) to the door panel (C) with the bolt (DD) using a Phillips screwdriver (NOT included),
(see Figure 8).
Hardware Used:
DD Bolt (M4 x 10) x 1
B
DD
N
D
H
C
I
D
H
J
07
Figure 5
Figure 6
Figure 7
5. Attach back panel (D) to back-left leg (H) and back-right leg (I) with bolts (AA) and washer (BB) using hex screw
driver (CC), (see Figure 5).
NOTE:
DO NOT tighten the screws completely.
Hardware Used:
AA Bolts (M6 x 15) x 4
BB Washer (M6) x 4
CC Hex screw driver x 1
6. Attach gas cylinder support (J) to back panel (D) and front panel (B) with bolts (AA) and washer (BB) using hex
screw driver (CC), (see Figure 6).
NOTE:
Tighten all screws completely.
Hardware Used:
AA Bolts (M6 x 15) x 4
BB Washer (M6) x 4
CC Hex screw driver x 1
7. With the help of another person, carefully turn the fire pit to the upright position. Attach the door panel (C) to the
back-left leg (H) by aligning the hinge on the door panel with those on the back-left leg (I) and inserting the pins
in the hinges, (see Figure 7).
CC
CC
AA
BB
AA
BB
