which he has access that the plug remains removed.
- Check regularly, but most definitely before every use, the mains cable and mains plug for
damage.
- If any damage is visible, then further use of the unit must not be made.
- If any damage and/or reduced functioning occurs, switch off and do not manipulate the unit.
- If, in such as event, a repair is necessary, contact an authorised by the manufacturer custo-
mer service point.
- Clean the surface of the housing and the guard with a dry cleaning cloth and a damp brush.
- Do not use petrol or any similar light flammable cleaning material.
- After cleaning, the fan must be completely re-assembled.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addiion, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug
- Cut through the mains cable at the plug
- Dispose of the unit in a proper manner.
Help with faults
Fault
Cause
Remedy
Blade does not turn.
Speed setting to „0“.
Switch on unit.
Mains plug not correctly
inserted.
Insert mains plug.
Household fuse blown/
trip defective.
Check household fuse/trip.
Fuse has blown due to
overload (motor overhe-
ating).
Remove unit from mains supply. Pull
plug from the socket and have the unit
repaired by a specialist or customer
service.
If the fault can not be remedied using the above listed remedies, then the plug has to be
removed from the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop
named by the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
GB
9
