Casada president II, Руководство пользователя

Страница: 15 / 23

In
h
a
lt
sv
er
Z
eI
c
h
n
Is
29
In
st
a
ll
at
Io
n
28
In
st
a
ll
at
Io
n
InstallatIon InstallatIon
• Connect the U-fork which is on the bottom of the backrest with
the connecting rod under the seat through the attached pin
(a) . secure the pin with the split pin (B) .
• plug the cables to the seat as demonstrated.
note: plug black to black and gray to gray, otherwise the chair can
get damaged.
• Attach the backrest pad with the hook and loop fasteners.
(a) and (B) then connect the heat-up plug with the plug
from the seat. (c)
03. install tHe Backrest
05. attacH tHe Backrest
04. connect tHe plugs
• put the backrest with the left and
right available steel heads in the ap-
propriate brackets which are inside
the seat of the chair.
a: steel heads (on the backrest)
B: Holder (on the seat part)
02. install tHe Bacrest
(a)
(B)
grey black
black
grey
• When setting up the chair, make sure
there is at least 50 cm of space behind
the backrest and 50 cm of space in front
of the footrest.
01. BeFore installation
(a)
(B)
(c)
B
A
A
at least
50 cm
at least
50 cm