Casada KENNEDY IV, Руководство пользователя

Страница: 22 / 27

42 43
reMote control reMote control
re
MO
te
c
O
ntr
O
l
re
MO
te
c
O
ntr
O
l
[1] StArt/Stop
you can switch on the control unit with this button. When the control lights
flash, the chair is now on standby. to start, select any massage function. the
timer automatically starts a 15 minute run time. to stop the massage, press this
key again. the massage heads then automatically move back to the starting po-
sition.
[2] tiMer
Once a function is selected there is an automatic run time of 15 minutes. By pres-
sing the timer button you can change the intervals to “20>25>30>5>10>15>20”
minutes.
note :
to switch off the signal tones press the timer button for 5 seconds. to activate
the tones press the button again for 5 buttons.
[3] zero-g
you can move the massage chair into a complete lying position with this button.
Feet and head are in line. the massage is at its strongest in this position as the
whole body weight is resting on the massage units.
note :
the ZerO-g function cannot be combined with the slumber and thai automatic
programs.
[4] pAuSe
you can briefly interrupt a program during a massage at any time by using the
pause button. at the same time the timer stops and the lcd display flashes. the
massage chair is in standby mode at this time so only the lying position and the
foot rest may be adjusted. in order to continue the massage press the Pause
button again.
[5] FootreSt
Footrest angle adjustment
By pressing this button you can adjust the angle of the footrest to an optimal
position. Once you have found the best position, press the button again in order
to stop the process.
Footrest length adjustment
By pressing and holding these buttons you can adjust the footrest to your in-
dividual body size.
(When selecting an automatic program, the footer of your
body length adjusts automatically.)
[6] lying poSition
you can select the desired lying and sitting position with this button.
[7] poSitioning tHe MASSAge HeADS
you can select / vary the position of the massage heads using the but-
tons. For even more comfort during the massage the user can make further ad-
justments to the height of the massage by pressing this button after the scan
program is carried out. the massage rollers move up and down until the best
position is reached and you release the button.
[ 8] 3D Setting
you can regulate the pressure point of the massage heads with this button.
Press the “ + ” in order to move the massage heads out and “ - ” to move the mas-
sage heads in.
autOMatic PrOgraM FOr the WhOle BacK
When you start one of the 10 automatic programs the “auto scan” starts to scan
your body structure. during this process you have the option to manually make
size settings and adjust the massage seat to your requirements.
[9] reFresh [10] sluMBer [11] Balinese [12] deeP tissue [13] thai
[14] calM [15] recOVery [16] chinese [17] shOulder [18] luMBar
note:
the sluMBar and thai programs are not suitable for older people.
[1]
[7]
[9] [14]
[12]
[15]
[16]
[13]
[10]
[11]
[2] [4]
[8]
[3]
[6] [5]
[19]
[20] [17]
[18]
[29]
[33]
[35]
[36]
[22/23]
[21]
[28]
[32]
[37]
[38]
[26/27]
[24/25]
[30]
[34] [31]