background image

www.CasablancaFanCo.com

1.888.227.2178

www.CasablancaFanCo.com

1.888.227.2178

www.CasablancaFanCo.com

1.888.227.2178

What to Expect with Your Installation

Know your wiring

If you are unfamiliar 
with wiring, use a 

qualified electrician.

You may need a 

friend to help you.

Check box to see 

fan weight

Assess location

30 inches

from blade tip to 
nearest wall or 
obstruction

7 feet

From bottom 

edge of blade 

to the floor

Select a downrod length

Assess ceiling angle

Ceilings that are more 
than 34° will require an 

angled mounting kit. 
See page 3 for details.

Must be able to 

secure the fan to 

building structure or 

fan-rated outlet box

1

2

3

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

w.1 - To reduce the risk of fire, electrical shock, or personal 

injury, mount fan directly from building structure and/or an 

outlet box marked acceptable for fan support of 70 lbs (31.8 kg) 
and use the mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or 

servicing your fan, disconnect the power by turning off the 
circuit breakers to the outlet box and associated wall switch 

location. If you cannot lock the circuit breakers in the off 

position, securely fasten a prominent warning device, such as a 

tag, to the service panel.

w.3 - To reduce the risk of fire, electrical shock, or motor damage, 
use only Casablanca Solid State Speed Controls.

w.4 - To reduce the risk of personal injury, do not bend the blade 

brackets when installing the blade brackets, balancing the blades, 

or cleaning the fan. Do not insert foreign objects in between 
rotating fan blades.

c.1 - All wiring 

must be in accordance with national and local 

electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, 
use a qualified electrician. 

c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to part 15 of the FCC 
Rules. These limits are to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and if not 
installed and used in accordance with the instructions may cause 
harmful interference to radio communications.

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

CAUTIONS

2

M8539-01 • 01/12/16 • © 2016 Casablanca Fan Company

2

Содержание M8539-01





















Отзывы: