10
CAUTION: Failure to fully lock in the downrod
before securely tightening the set screw may
cause the fan to separate from the downrod during
normal operation!
Allen Wrench
Step 7. Securely retighten the setscrew on the Motor Adapter with the provided allen wrench.
Step 8. Place Motor Adaptor Cover over Motor Adaptor.
HANGING THE FAN
Step 1. Trim wires to about 6" from the top of
the downrod.
Step 2. Strip 1/2" of insulation off each wire
using wire strippers. Raise the fan and place the
ball into the hanger bracket.
Step 3. Align the notch on the ball with the
indent in the hanger bracket. (Rotate the fan
until you hear the notch pop into place.)
Indention
WARNING:
Fan may fall if
not assembled as directed
in these installation
instructions.
Notch
