Troubleshooting
If the power supply indicator doesn't light up and the laser doesn't work, please check the
Unpacking
power supply and the input voltage.
We will soon lead you into new sense of vision realm a life from now on!
In Stand-Alone operation, if the power supply indicator is light up and sound active
Thank you for purchasing this product.Please read user guide for safety and operations infor-
indicator isn't light up, but the laser is shut off doesn't work.
mation before using the product. Keep this manual for future reference. This product can create
A. Because sound is too small make for laser shut off in sound active, please increase
perfect laser programs and effects since it has passed a series of strictly tests before delivery.
the music volume or increase audio sensitivity with sensitivity knob, please check as below
Please check the attachments listed on the page after opening the carton. In the event of carton
B. Please check if unit has been set up in slave mode, then set up in master mode.
damage or attachment missing in transit, please contact your dealer or our after sales service
In Master-Slave operation, slave unit don't function, please check as below.
department.
A. Make sure to there's only one master in the chain, and the others are set in slave mode.
Attachments
B. Make sure to control the unit without DMX console controlling.
1. Laser Light:1PCS
2. Power Cable:1PCS
3. User Guide:1PCS
C. Make sure to take a good quality power cable and connection.
Notice
In DMX mode operation, the laser is OFF and the DMX signal indicator is unlighted,
Do not turn on and off the unit frequently.
please check as below.
Do not exposure the human eye direct to laser beam.
A. Make sure to set up the DMX mode.
Before using this unit make sure the power supply is ground.
B. Make sure to have a good connection.
This unit is intended for indoor use only and should be prevented form water, moisture
In DMX operation, the unit can’t be controlled by the DMX console, but the DMX signal
and shake. The working temperature of this unit is 18
～
30
℃
, do not use this continuously
indicator is flashing, please make sure the DMX console and unit have the same channel.
over 3 hours, otherwise it shortens the lifetime of the unit.
If the output beam direction above isn't the right way, please restart the unit.
Use cleaning tissue to remove the dust absorbed on the external lenses periodically to opt-
If the unit is fail, please turn off the unit, then turn on again after 5 minutes.
imize light output.
Do not remove or break the warranty label, otherwise it void the warranty.
After trying the above solution you still have a problem, please contact your dealer or
Always replace with the exact same type fuse, replacement with anything other than the
our company for service.
specified fuse can cause fire or electric shock and damage your unit, and will void your
manufactures warranty.
This lamp laser dangerous grade is a Class III B, eyes directly in observation in danger in-
side the light beam, the minimum irradiation is apart from 15
The AC110V/220V switch please don't turn without authorization, because the user turns
to result in the machine damage by oneself, our company is all irresponsible.
8
1
General instructions
