3
• This receiving bracket can be mounted opposite the cassette to either a
solid wall or to a metal or wooden post secured firmly in the ground.
• Measure and mark out the dimensions shown. Ensure that the receiving
bracket is placed at the same height & centered with the cassette on the
opposite wall.
• Drill two holes at 90mm apart for a solid wall, using a 7.5mm masonry
drill bit.
NOTE:
For post installation, use suitable fasteners & fixing method for the post
material used.
• Securely attach the receiving bracket to the wall or post.
- For attaching to a solid wall, use 2 x suitable masonry fasteners.
- We suggest using either a nail anchor (8mm x 60mm deep), or sleeve
anchor (8mm x 40mm deep).
- Metal washers may have to be used if the head of the fastener is smaller
than the diameter of the holes in the receiving bracket.
OPERATION
• Hold the centre of the front bar.
• Pull out from the cabinet and secure in the receiving bracket.
• To adjust line, turn the adjustment knob on the side of the cabinet
to Tighten or Release the line tension.
NOTE:
Always release the line tension using the adjustment knob before
removing the Front Bar from the Receiving Bracket.
