13
Warning
►
Do not take out the sprayer,
the filter holder and/or the coffee jug during brewing, or hot
water will splash. Danger of burns.
►
The warming plate is hot during and after keep warm. Danger of burns.
►
Do not touch the sprayer to avoid being burned during brewing.
►
Do not place an empty coffee pot on the hot warming plate.
4.2.6
AUTO Start Function
You can preset a specific start time for the brewing process.
1. Complete the "Preparations".
2. Press AUTO button for 3 seconds. TIMER is flashing in the LCD display.
3. Press the HOUR button to set the desired starting hour.
4. Press the MIN button to set the desired starting minute.
5. Press the AUTO button to confirm the automatic start time, it will light up in red.
6. When the automatic start time is reached, the device will start to brew the coffee. The red
LED of the AUTO button will turn off and the ON – OFF button will light up in red.
Please note
►
You can set the AUTO Function as long as TIMER is flashing. If TIMER stops flashing
and you have not confirmed the automatic start time yet, the device switches back to
the current time. Press the AUTO button again, to get back to the AUTO function
operating.
►
You can cancel the AUTO Start Function by pressing the AUTO button.
►
You may see the preset automatic start time by holding the AUTO button.
►
To change the automatic start time, cancel the AUTO Start Function and
follow the steps 2-5 again.
4.2.7
Coffee jug or other coffee containers
The provided coffee jug is perfectly designed for the use with the Gourmet Gold cup and
ensures the best function and coffee result.
However, as the strength control valve is operated manually, the device can also be used with
another heat-resistant, suited jug (like coffee cup, porcelain jug etc.).
Choose a suitable jug that can hold the entire amount of water that is in the water tank. The
opening of the jug must be large enough to prevent the dripping coffee from splashing or
overflowing. The jug must fit on the hotplate.
If you place a jug on the warming plate, that can’t hold the entire amount of water from the
water tank, make sure to close the strength control valve in time. Then place another container
under the coffee outlet and continue the dripping. You can close the strength control valve to
fill several coffee cups in one brewing process.
Complete the other "Preparations". Start the brewing process.
