IMPORTANT
IT IS IMPORTANT TO FLUSH OUT THE WATER
PIPES BEFORE INSTALLING THE MIXER.
Hot and cold water inlet pressures should be equal.
Inlet pressure range: 150 – 500 kPa
New Regulation:
500 kPa maximum operating pressure at any
outlet within a building.
(Ref. AS/NZS 3500)
Maximum hot water temperature: 80
o
C
.
www.casalusso.com.au
FAILURE TO COMPLY WITH ANY OF THE ABOVE INSTRUCTIONS WILL VOID ALL WARRANTIES
1. Install the flexible hoses into the mixer and hand tighten in place.
The flexible hoses are to be fitted into the correct inlets for hot water
and for cold water (Red band for hot and blue band for cold).
DO NOT USE SPANNER TO TIGHTEN AS IT CAN DAMAGE THE O RING
2. Place the mixer into position and secure using the horse
shoe and fixing nut.
IT IS IMPORTANT TO FLUSH OUT THE
WATER PIPES BEFORE INSTALLING THE MIXER.
3. Ensure gauze strainers are placed into the flexible hoses
then connect the isolating taps.
CONTENTS
Copper Pipe
Gravity Ball
Body
Adapt
Lock Nut
O-ring
O-ring
Spout
Protective Sleeve
Handle
3/8 Gasket
Wearing Ring
Screwed Pipe
Gasket
Gasket
25mm Cartridge
Screw
Screw
Pex Flexible Hose (Red)
Pex Flexible Hose (Blue)
Quick Connector
180cm Nylon Pull Hose
Gasket
Positioning Pipe Sleeve
O-ring
O-Ring
INSTALLATION
Cartridge Lock Nut
Aerator Key for Spray
Spray Head
10 Check Valve
10 Check Valve
Decorative Cap
Protective Sleeve
ZARA Kitchen Mixer - Installation Instructions
Apply Glue Here
For copper pipe
For blue flexible hose
For red flexible hose