Sunset Projector Light with Remote Control K882
Instructions for Use
Please read and retain these instructions for future reference
v001: 06/05/22
The Enterprise
Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your telephone company’s networ
k access.
Please check with your telephone supplier.
User instructions
1.
360 Degree Rotating Head can face left, right or upwards
2.
Connect the power cord of the USB terminal to the energizing port and plug the other end into the
power port. This product is suitable for general USB interface line,
which can be connected to mobile power supply, computer, ordinary
and vehicle-mounted power supply, etc.
Note: To operate the projector this needs to be connected to a USB
port. The battery is not rechargeable.
3.
The switch position is on the USB connection cord, and it can be
controlled by pressing the switch after connection.
Remote control
BATTERIES
•
Keep batteries away from children and pets.
•
Do not mix used and new batteries.
•
Remove the batteries if left for long periods.
•
Never dispose of batteries in a fire.
•
Battery disposal, spent or expired batteries must be properly disposed of and recycled in compliance
with local regulations. For detailed information, contact your local authority.
•
Follow the battery manufacturer’s safety, usage, and disposal instructions.
DISPOSAL
•
Coopers of Stortford use recyclable or recycled packaging where possible.
•
Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•
Plastics, polybags
–
Contains the following recyclable plastic.
1.
1.The remote control requires 1x CR2032
battery (included)
2.
Remove the transparent card form the back
cover of the remote control before use.
3.
When operating, aim the remote control at
the front of the lamp body to ensure that
there is no interference obstacle between the
remote control and the lamp body.
