3. Changing Unit of Weight
(kg, lb, oz)
Press the key first. Holding it, press the key in the simple weighing
mode. The display shows the "UnIt" shortly and then you may select
kg, lb, or
oz as the unit of weight.
4. Hold Function
(SW-1S only)
When the weight is unstable,
press the
key.
Display will show the
"HOLD" for a few seconds.
Then the display will
show the average weight.
kg
kg
Remove the commodity
from the platter, or press
key again to exit from
"HOLD" mode.
kg
9
1. Simple Weighing Mode
Place a commodity on
the platter.
Remove the commodity
from the platter.
2. Weighing with Tare
TARE means the weight of container being used for a commodity.
TARE key function is to subtract the weight of the container from full weight loaded.
kg
kg
Place a container on
the platter.
Press the
key.
Place a commodity into the
container, then the display
will show only the weight of
the commodity.
kg
kg
kg
Remove container and
commodity, then the display
will show the weight of the
container with "-" symbol.
Press the
key, then
display will show the
"0.000".
kg
kg
8
OPERATIONS
Turn on the display by pressing key. Then, the display will show all the
segments and count up "0" to "9". You may stop this automatic counting by
pressing the key.
When you turn on the display, make sure that platter is empty. Otherwise,
display will show "Err", an error of initial zero range. Please refer to
"ERROR MESSAGE" section for more information on page 14.
When the weight becomes stable the display shows the stable sign (
) on.
You may need to make it "0.000" by pressing key unless the display
indicate "0.000" under the empty platter.
