CAS MW-II Series, Руководство пользователя

Страница: 11 / 26

12
2) Counting samples
Note that you can use tare function and zero adjustment in counting mode.
▶
% Mode
■ The weight is displayed as a percentage of the reference.
④
Place sample on the platter, then the weight is
displayed as a percentage of the reference.
⑤
Place sample on the platter, then the weight is
displayed as a percentage of the reference.
■ Minimum Weight of a Sample
Percent (%) Mode
MW-II 300 5.00g
MW-II 600 5.00g
MW--II 3000 50.0g
MW-II 6000 50.0g
▶
NOTE : Sample weight should be bigger than minimum sample weight.
If you have set the sample size, place another
samples to count on the platter then the
display shows the number of samples.
To exit this counting mode, press the MODE key.
①
To go to % mode, press the MODE key until
the display shows %.
②
Place a reference sample on the platter then
press the SET key. The reference sample is set
to 100%. Remove the sample from the platter.
③
Place sample on the platter, then the weight is
displayed as a percentage of the reference.