CAS IE-1700, Руководство пользователя

Страница: 5 / 9

9 8
POWER SAVING
The display will show when the load are at stable status in excess of 15
minutes and revert to normal weighing readings while load changes. when the
load are at stable status in excess of 60 minutes, the scale will turn off
automatically
RECHARGING BATTERY
1. Turn off, connect the adapter with 220V AC power supply , also insert the
plug in the socket which located in the rear of scale. The light become green,
it means it’s recharging automatically, until the green light become red, that
means recharging is finished.
2. When you need to use crane scale hour after hour, take off the rear cover,
change the battery with recharged battery.
Attention: Generally, the time of recharging should not lower than 8 hours, this
scale have recharging protection function, long time recharging will not damage
the battery.
TURN OFF
Press OFF/ON on scale 2 seconds
Press OFF on controller 2 seconds
Stable after 15minutes, it show , after 60minutes,it turn off automatically.
Electrical Principle Diagram
Control
distance
Control key
Battery
Load cell
signal
enlarges
A/D CPU
LED or LCD
display
CHECK BATTERY
Press
OFF/ON
on scale, when turn on or turn off,it shows
Press OFF on controller, when turn off, it shows
Press MR F1 , it shows , press MR return
HOLD THE WEIGHT READING
Press “ HOLD” key on the remote controller to hold the displayed weight reading.
At this moment, “ HOLD” light on, Press this key again will disable hold
function.
LOW BATTERY WARNING
When the battery voltage lower than , the display flash, but the
scale can still work until the display show , one minute later,
it will turn off automatically, you need to recharge the battery to use again.