CAS ERII-15, Руководство по обслуживанию

Страница: 28 / 34

ER ER ER ER- - - -II II II II
Service Manual Service Manual Service Manual Service Manual
28
28 28
28 7/4/2007
7/4/2007 7/4/2007
7/4/2007
6. Error Messages & Solution
Error
Message
on Display
Description Solution
"Err 0"
The "Err 0" occurs when scale is not stable.
Remove unstable facts.
"Err 1"
The "Err 1" occurs when a current zero point has
shifted from the last span calibration.
Please call your CAS
dealer.
"Err 2"
The "Err 2" is not a real error. Only it prompts
return CAL switch to the normal position.
Please call your CAS
dealer.
"Err 3" The "Err 3" is an overload error.
Please remove the
weight.
"Err 4" The "Err 4" is leakage of payment.
Scale needs more
payment.
"Err 5" The "Err 5" means there is already tare. Remove the tare.
"Err 6"
The "Err 6" means total price summation is
over.
Please change unit price
or remove some weight.
"Err 7" The "Err 7" means total price is over.
Please change unit price
or remove some weight.
"Err 8" The "Err 8" means Euro rating price is over.
Please change unit price
or change euro rate.
“Err 11”
The "Err 11" means a writing error of the internal
nonvolatile memory. To recognize this error, be
sure to check the voltage on the circuit and do
calibration procedures.
If it still has "Err 11",
replace the digital module.
“Err 12”
The "Err 12" warns that the scale has lost the
parameters for weighing regulations or has lost
the factors for a digital span calculation.
Enter each condition codes
again (?).
Please try a span calibration
again if still not fixed.
“Err 13” The "Err 13" means the soft key code is broken.
Please try to find out which
key lost soft key code and
then input this code again.
“Err 14”
The "Err 14" means calibration range is not
correct.
Please call your CAS
dealer.
“Err 15” The "Err 15" means 1/2 or 1/4 unit price is over. Please change unit price