CAS EB Series, Руководство по обслуживанию

Страница: 11 / 31

EB
Service Manual
11 2007/06/13
2. Calibration
2.1. General Calibration
Pressing and holding calibration switch press [POWER] key to go to calibration mode.
User can move to other mode by using [ZERO] key in the calibration mode.
User also moves to other sub-modes for each mode by using [TARE] key.
Please simply follow below procedure to move to other mode.
(1) Calibration Mode: Pressing and holding “Calibration Switch” press [POWER] key.
(2) It displays “CAL-0” after “CAL”, and it blinks the version of scale three times.
(3) Selecting menu: press [TARE].
(4) ENTER(Setting) : [TARE] key
MODE Function
CAL 1 Display normalized AD
CAL 2
Display Keypad infomation-
CAL 3
Weight Setting Mode
“UnLoad”
→
[TARE]
→
“MIDD”
→
[TARE] after loading for 1/3 weight
→
“FULL”
→
[TARE] after loading for Full weight
→
“MIDD”
→
[TARE] after loading for 1/3 weight
→
“END”
CAL 4 Option Setting ( Table 1
참조
)
CAL 5
Display filtered Raw AD
CAL 6 Function setting on each Key ( Table 2
참조
)
CAL 7 % Calibration
CAL 8
Battery calibration
CAL 9
Gravity constant
CAL 10
Set calibration factor
“Unit” [TARE] select 0, 1 (0:kg, 1: lb) [TARE]
“CAPA” [TARE] select capacity [TARE]
“MCAPA” [TARE] select mid-capacity [TARE]
“W-dP” [TARE] Select Decimal Point [TARE]
“ 1 d ” [TARE] Select division [TARE]
“Dual” [TARE] Enable dual interval (0:disable, 1:enable) TARE
CAL 11
Set nation(00 : OIML , 01 : NTEP , 02: KOREA)