CAS DL Series, Руководство пользователя

Страница: 12 / 19

13
6. Auto Power Off Function
Auto-Power off function is to automatically power off as time is set. This
function is helpful to save battery, which is not in use. The following is the
setting procedure of Auto-power off.
①
When the scale is turned off
press ON/OFF key, holding
ZERO key. Then you will see
the "AP-10".(If you have set
this before,display will show
previous value.)
②
Press the TARE key until the
display shows the "AP-x0"
that you wish to take.
(Refer to TABLE 1.)
③
Press the ON/OFF key, and
then the scale saves what you
programmed and shows all
the segments, counting up
"0" to "9".
TABLE 1.
DISPLAY FUNCTION
AP-00 This function does not automatically power off.
AP-10
This function does automatically power off when the scale is not in
use for 10 minutes.
AP-20
This function does automatically power off when the scale is not in
use for 20 minutes.
AP-30
This function does automatically power off when the scale is not in
use for 30 minutes.