CAS DL-100 Скачать руководство пользователя

Страница: 11 / 13

Limit Mode

You have to set the high value and low value to use this limit function.

How to set the limit

Change the mode to limit mode(kg) and press the SET key, then you will see the

previous high limit value.

If the high limit value is 100kg, press the INC key to increase the number and
press the MODE key to enter the next number.

Press the SET key to enter the low value, then you will see the previous low limit
value.

Enter the low limit value(30kg). Press the INC key to increase the number and
press the MODE key to enter the next number.

Press the SET key to go to normal mode.

If the loaded weight is lower than low limit value, you will see the “LO” lamp on

the display. If the loaded weight is higher than high limit value, you will see the
“HI” lamp on the display. If the loaded weight is in the range of high and low limit
value you will see the “GO” lamp on the display.

Содержание DL-100














Результаты поиска

Содержание DL-100

Отзывы:

Похожие инструкции для DL-100

Бренды по названию

Популярные бренды

CAS DL-100, Руководство пользователя

Результаты поиска

Содержание DL-100

Отзывы:

Похожие инструкции для DL-100

Бренды по названию

Популярные бренды