CAS DH, Руководство пользователя

Страница: 11 / 19

12
③
Full capacity setting
：
Display
【
FULL
】
press [TARE] key to come into the number input state.
Display
【
0 0 0 0 0 0
】
press [TARE] key
， indicate symbol▼will move to right one step
by step to which input position you want, and press [ZERO] to add
value to adjust the number you need, press [TARE] to adjust all the
numbers you need until input the full capacity you need, and press
[HOLD] or confirmation and indicator will come into next
parameter setting.
For example, when it displays
【
0 2 5 0 0 0
】
press [HOLD] key for confirmation and will
come into zero point setting calibration state.
④
Zero calibration
：
Display
【
nOLOAD
】
Insure there’s no loads on the platform and wait until the stable
indicate symbol▼display
, then press [HOLD] key
，
zero
calibration finished, and indicator come into full capacity calibration
state.
⑤
Full capacity calibration
：
Display
【
AdLOAD
】
Put weights on the platform and press [TARE] key to come into
input state after stabilization.
Display
【
0 0 0 0 0 0
】
Press [TARE] key
， the indicate symbol▼move to right and to the
position which can select number input, press [ZERO] key to add
number and until input the number you need and then
press [TARE] key , the indicate symbol▼move to right and to the
position which you can select number input ,press [ZERO] key to
add number until get the number as same as the weight value of the
weight. Press [HOLD] key for confirmation and finish the full
capacity calibration state.
Display
【
End
】
⑥
Press [CLEAR] key and back to weighing state and new parameters take effects. At this time you
can also keep pressing [HOLD] key to other parameters.