CAS CI-2001AS Скачать руководство пользователя страница 15

Страница: 15 / 16

2. Errors in Calibration Mode

Err 21

@@@@@@@@@@@@g?

Reason: The resolution is set to be exceeded the limit 1/50,000.

@@@@@@@@@@@@g?

Trouble shooting: Lower the resolution.

The resolution = allowed weight/one division
Modify the allowed weight in CAL 1 or modify the division
in CAL 2 so that the resolution should be below 1/50,000.

Err 22

@@@@@@@@@@@@g?

Reason: The weight for span calibration is set to be lower than 1% of the

maximum capacity of the scale.

@@@@@@@@@@@@g?

Trouble shooting: Set the weight for span calibration in CAL 3 to be more than

10% of the maximum capacity.

Err 23

@@@@@@@@@@@@g?

Reason: The weight for span calibration is set to be exceeded 100% of the

maximum capacity of the scale.

@@@@@@@@@@@@g?

Trouble shooting: Set the weight for span calibration to be within the

maximum capacity of the scale in CAL 1.

Err 24

@@@@@@@@@@@@g?

Reason: The load cell output is too small at SPAN calibration.

@@@@@@@@@@@@g?

Trouble shooting: Setting of current resolution is not possible due to the error

in load cell. Proceed calibration again with less resolution.

ERROR MESSAGE & TROUBLE SHOOTING

1. Errors in Weighing Mode

Err 02

@@@@@@@@@@@@g?

Reason: Load cell connection failure or error in A/D conversion part.

@@@@@@@@@@@@g?

Trouble shooting: Check the load cell connector to see if the polarity of signal

is reversed.

Err 06

@@@@@@@@@@@@g?

Reason: Error in printer connection

@@@@@@@@@@@@g?

Trouble shooting: Check with printer connector.

If there is no problem with printer and printer connector,
please request A/S to head office.

Err 08

@@@@@@@@@@@@g?

Reason: The ZERO key or TARE key is adjusted not to be operated under the

unstable condition.

@@@@@@@@@@@@g?

Trouble shooting: Press zero or tare key in stable condition.

Err 10

@@@@@@@@@@@@g?

Reason: Tare weight exceeds the maximum capacity of the scale.

@@@@@@@@@@@@g?

Trouble shooting: Set the tare to be smaller than the maximum capacity.

Otherwise the maximum capacity is reset to be larger than
the tare to be set in the calibration menu, and reset the
calibration using weight.

Err 13

@@@@@@@@@@@@g?

Reason: The zero range deviates from the set range.

@@@@@@@@@@@@g?

Trouble shooting: Confirm that there is nothing on the weighing platform.

If nothing exist, do calibration in CAL mode.

Over

@@@@@@@@@@@@g?

Reason: The weight on platform is too heavy to be measured.

@@@@@@@@@@@@g?

Trouble shooting: Do not load the item exceeds the maximum tolerance.

If the load cell is damaged, the load cell should be replace.

Load cell sense voltage for 5V excitation voltage

Recommended resolution

2mV 1/1,000

4mV 1/2,000

10mV 1/5,000

Err 25

@@@@@@@@@@@@g?

Reason: The load cell output is too large at SPAN calibration.

@@@@@@@@@@@@g?

Trouble shooting: Setting of current resolution is not possible due to the error

in load cell. Proceed calibration again with less resolution.

Содержание CI-2001AS

















Результаты поиска

Содержание CI-2001AS

Отзывы:

Бренды по названию

Популярные бренды

CAS CI-2001AS, Руководство пользователя

Результаты поиска

Содержание CI-2001AS

Отзывы:

Бренды по названию

Популярные бренды