19
12. Real Time Clock (F model)
Step
Operation & Description
1
How to enter the pairing mode
1) CCB crane scale
When the display is off, press ON/OFF key while pressing * key.
When
“ =
”(Firmware version) is displayed, press kg/lb key.
Then,
“
” is displayed.
2) CRD-F wireless display
Press the ON/OFF key to power on and immediately press kg/lb key.
And press the kg/lb key again.
Then,
“
” is displayed.
3) CRC-100 controller
When the display is off, press ON/OFF key while pressing ENTER key.
When
“ =
”(Firmware version) is displayed, press3 key.
Then,
“
” is displayed.
4) CRC-200 wireless dongle
Press the SET KEY for the 5 seconds with the power on that connected.
Then, the green light is blinking.
2
Pairing
When
“
” is displayed at both products, if you press * key of CCB
crane scale, pairing will finish.
Please check
“
” message at both products.
(CRC-200: green light will be turn on)
If ending message is not appear, please repeat the pairing.
