CAS Corporation ER PLUS LCD, Руководство по обслуживанию

Страница: 15 / 65

ER
PLUS
Service Manual
15 9/27/2010
(6) Press [TARE] key to set the value, and then the scale displays “CAPA“ and “15”. It means
that full-capability is “15 (calibration unit, kg or lb)”
(7) Input a capability by using [TARE] key.
(8) And then “mid“ message is displayed. “5” will be shown. It means that mid-capability is “5
(calibration unit, kg or lb)”
(9) Input a mid-capability by using keypad.
(10) Press [TARE] key, and then “W-dP “message and “3” will be shown. It means that weight
decimal point is “3 (will display 0.000)”
(11) Input a weight decimal point by keypad.
(12) Press [TARE] key, and then “1d “ message and “0.005” will be shown. It means that the
one division is “0.005 (calibration unit, kg or lb)”
(13) Input an one division by using keypad.
(14) Press [TARE] key, and then “dual” message and “1” will be shown. It means that dual
interval is enabled. (0 : disable, 1 : enable)”
(15) Input a dual interval setting by using keypad.
(16) Press [TARE] key, and then “tare” message and “0” will be shown. You can
enable or
disable custom tare (0:disable, 1:enable)
(17) Press [TARE] key to save calibration factor and then “C-10 ” message will be shown. Add
to this you can browse any menu to reset value by using [ZERO]key and [-] key in the C-10
Mode.
* CAL-10 TABLE
CAPA(Kg) Interval Resolution
CAL 10 SETTING
Unit CAPA Mid W-dp 1d dual tare
1 Dual 1/2000 3 1000 500 1 0.5 1 0 or 1
2 Single 1/10000 3 2000 1000 1 0.2 0 0 or 1
2 Dual 1/2000 0 2 1 3 0.001 1 0 or 1
3 Dual 1/3000 0 3 1 3 0.001 1 0 or 1
5 Single 1/10000 3 5000 2000 1 0.5 0 0 or 1
5 Dual 1/2500 0 5 2 3 0.002 1 0 or 1
6 Dual 1/3000 0 6 3 3 0.002 1 0 or 1
10 Single 1/10000 0 10 5 3 0.001 0 0 or 1
10 Dual 1/2000 0 10 5 3 0.005 1 0 or 1
12 Dual 1/2400 0 12 5 3 0.005 1 0 or 1
15 Dual 1/3000 0 15 5 3 0.005 1 0 or 1
20 Single 1/10000 0 20 10 3 0.002 0 0 or 1
20 Dual 1/2000 0 20 10 2 0.01 1 0 or 1
25 Dual 1/2500 0 25 10 2 0.01 1 0 or 1