SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]
Release button 12: Turn off relay 12 (disconnect B and C, connect A and B)
3) Learning Latched control mode: When the receiver is in the status of LEARNING, press button 3 of the remote control.
Control mode Latched (Channel 1~12): Press -> On, other relays Off; Press other button -> Off.
Press button 1: Turn on relay 1 (connect B and C, disconnect A and B)
Turn off other relay (disconnect B and C, connect A and B)
…
Press button 12: Turn on relay 12 (connect B and C, disconnect A and B)
Turn off other relay (disconnect B and C, connect A and B)
4) Learning Toggle (Channel 1~4) + Momentary (Channel 5~8) + Latched (Channel 9~12) control mode: When the receiver is in the status of
LEARNING, press button 4 of the remote control.
5) Learning Toggle (Channel 1~6) + Momentary (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button 5 of
the remote control.
6) Learning Toggle (Channel 1~6) + Latched (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button 6 of the
remote control.
7) Learning Momentary (Channel 1~6) + Latched (Channel 7~12) control mode: When the receiver is in the status of LEARNING, press button 7
of the remote control.
8) Learning Latched (Channel 1~4 interlocked; Channel 5~8 interlocked; Channel 9~12 interlocked) control mode: When the receiver is in the
status of LEARNING, press button 8 of the remote control.
9) Learning Toggle (Channel 1~10) + Momentary (Channel 11~12) control mode: When the receiver is in the status of LEARNING, press button 9
of the remote control.
10) Learning Toggle (Channel 1~4) + Momentary (Channel 5~12) control mode: When the receiver is in the status of LEARNING, press button 10
of the remote control.
11) Learning Toggle (Channel 1~4) + Latched (Channel 5~12) control mode: When the receiver is in the status of LEARNING, press button 11 of
the remote control.
12) Learning Toggle control mode (Channel 1~10) + All On / Off (Channel 11/12): When the receiver is in the status of LEARNING, press button
12 of the remote control.
Press button 11: Turn on all 12 relays; Press button 12: Turn off all 12 relays
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps
slow flash. That means all stored codes have been deleted successfully.
Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
