SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://w ww.carymart.com E-Mail: [email protected]
RF Wireless Remote Control Kit (Model 0020524 S1PU-DC12-ANT3+ CB-2N)
Package Include:
1 x Receiver: S1PU-DC06
–ANT3/ S1PU-DC09-ANT3 / S1PU- DC12-ANT3 / S1PU-DC24-ANT3
1 x Transmitter: CB-2N
1 x User manual
Feature:
Application: This type of w ireless remote control device can use a normally open output device to w irelessly control another AC or DC device, and it
can be used for synchronous w ireless control of various home, industrial or agricultural equipments, such as w ireless control of the w arning host and
the w arning horn, w ireless control of the lights, w ireless synchronization control of the equipments and so on.
Wireless control, easy to install.
Waterproof: The receiver has w aterproof case and w aterproof connector, it can be installed outdoors.
Relay Output: This receiver is relay output, it can be used to operate both DC and AC equipments. The terminal is NO / NC (normally open / normally
closed), w hich serves as a sw itch. That means you should also connect a separate pow er supply to it.
High Pow er: Each channel can w ork at maximum current 30A, such as 360W/12V, 180W/6V, 270W/9V, 720W/24V, 3000W/110V, 6000W/220V.
With w
ired control terminal
s: You can connect sensors, limit sw itches, manual sw itches or external devices to control the receiver.
With the external antenna, it can have a further w orking range.
Design w ith low -pow er and high-speed CMOS technology.
You can turn on/ off the receiver w ith transmitter (remote control) from any place w ithin a reliable distance.
Wireless RF signal can pass through w alls, floors, doors or w indow s.
With reverse pow er protection and over current protection.
Reliable control: The receiver only w orks w ith the transmitter w hich use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use tw o or more units in the same place.
Receiver Parameters:
Model No. S1PU- DC06
–ANT3/ S1PU- DC09-ANT3 / S1PU-DC12-ANT3 / S1PU-DC24-ANT3
Pow er Supply (Operating Voltage): DC6V (S1PU-DC06-ANT3), DC9V±1V (S1PU-DC09-ANT3), DC12V±1V (S1PU-DC12-ANT3), DC24V±1V
(S1PU- DC24-ANT3)
Output: Relay output (Normally open and normally closed)
Working Voltage Range of Relay: AC110~240V or DC0~28V
Wire range for the terminals: 22-9AWG
Working Frequency: 315MHz
Channel: 1CH
Control Modes: Latched
Static Current: ≤6mA
Maximum Working Current: 30A
PCB size: 90mm x 59mm x 18mm
Case size: 100mm x68mm x 50mm
Work w ith Fixed code transmitters or Learning code transmitters.
External telescopic antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
External telescopic antenna use SMA connector.
If you stretches the external telescopic antenna, it can have a further w orking range, w hich is tw ice as much as it used to be.
Transmitter Parameters :
Model No.: CB-2N
With Extended Control Wires
Triggering method: connection and disconnection of tw o w ires.
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for a w eek, if you w ant a longer w orking time, please use a 9V pow er adapter.)
Operating Current: 10mA
Operating Frequency: 315MHz
Encoding Chip: PT2262 / PT2264 / SC2262
Encoding Type: Fixed code by soldering, up to 6561 codes
If you stretches the telescopic antenna, it can have a further w orking range, w hich is tw ice as much as it used to be.
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: 135mm x 42mm x 25mm
The working principle:
Transmitter CB-2N is a special remote control w ith normally open contact trigger. It has 2 input lines for connecting a variety of devices w ith normally
open contact output, such as w arning host, cable detectors, various sensors, manual sw itches, limit sw itches, Programmable Lo gic Controllers and
so on. The transmitter can be combined w ith different types of receivers to form a w ir eless control system that can be used to w irelessly control
