SHENZHEN FLYING INDUSTRY DEVELOPMENT CO.,LTD
http://www.carymart.com E-Mail: [email protected]
1) Press the learning button of receiver; signal LED on the receiver is on, it means the receiver enters the learning status.
2) Press any one button on transmitter, if signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the learning status, press again the learning button, if signal LED turns off, it means learning process was discontinued.
4) The receiver can learn several transmitters with different codes.
Delete all transmitters:
We have learned transmitter to the receiver. If you don’t want the receiver to work with the transmitter, you can delete all codes of transmitters, which
are stored in the receiver.
Operation: Press and hold the learning button of receiver until signal LED flashes slowly; then release the button, signal LED keeps slow flash. That
means all stored codes have been deleted successfully.
