CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY INSTRUCTIONS (EUROPEAN)
The conductors in the AC power cord are colored in accordance with the following code.
GREEN & YELLOW—Earth BLUE—Neutral BROWN—Live
U.K. MAIN PLUG WARNING: A molded main plug that has been cut off from the cord is
unsafe. NEVER UNDER ANY CIRCUMSTANCES SHOULD YOU INSERT A DAMAGED
OR CUT MAIN PLUG INTO A POWER SOCKET.
IMPORTANT! FOR YOUR PROTECTION, PLEASE READ THE FOLLOWING:
WATER AND MOISTURE: Appliance should not be used near water (near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken
so that objects do not fall and liquids are not spilled into the enclosure through openings.
POWER SOURCES: The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
GROUNDING OR POLARIZATION: Precautions should be taken so that the grounding or polar-
ization means of an appliance is not defeated.
POWER CORD PROTECTION: Power supply cords should be routed so that they are not like-
ly to be walked on or pinched by items placed upon or against them, paying particular atten-
tion to cords at plugs, convenience receptacles, and the point where they exit from the appli-
ance.
SERVICING: The user should not attempt to service the appliance beyond that described in
the operating instructions. All other servicing should be referred to qualified service person-
nel. If your unit is equipped with a fuse receptacle, replace only with the same type fuse. Refer
to replacement text on the unit for correct fuse type.
This symbol is intended to
alert the user to the pres-
ence of uninsulated “dan-
gerous voltage” within the
product’s enclosure that may be of suf-
ficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intend-
ed to alert the user to
the presence of impor-
tant operating and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
LIMITED WARRANTY
1 year on all electronic components. Does not cover cables, connectors, or broken parts caused by
normal ware and tear or dropage. Shipping costs are the responsibility of the customer. CARVIN
DOES NOT PAY FOR PARTS OR SERVICING OTHER THAN OUR OWN. A COPY OF THE ORIGINAL
INVOICE IS REQUIRED TO VERIFY YOUR WARRANTY. Carvin assumes no responsibility for horn
drivers or speakers damaged by this unit. This warranty does not cover, and no liability is assumed,
for damage due to: natural disasters, accidents, abuse, loss of parts, lack of reasonable care, incor-
rect use, or failure to follow instructions. This warranty is in lieu of all other warranties, expressed
or implied. No representative or person is authorized to represent or assume for Carvin any liability
in connection with the sale or servicing of Carvin products. CARVIN SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES.
When RETURNING merchandise to the factory, you may call for a return authorization number.
Describe in writing each problem. If your unit is out of warranty, you will be charged the current FLAT
RATE for parts and labor to bring your unit up to factory specifications.
HELP SECTION
RF Interference
If you encounter receiving interference (from other than an operating TV station), often it can be
eliminated by adjusting the receiver’s squelch control, as described in this manual.
Please note that wireless frequencies are shared with other audio services. According to Federal
Communications Commission regulations, “Wireless microphone operations are unprotected from
interference from other licensed operations within the band. If any interference is received by any
Government or non-Government operation, the wireless microphone must cease operation…”
If you need assistance with operation or frequency selection, please contact Carvin’s service
department.
Application
Freq. (MHz) Belt Pack Hand Held Mic
Head Mic Lavaliere Mic Instrument Cable
• Channel 1
800.20 UHBP-800.20 UHMC-800.20 UHHM UHLP UHGT
• Channel 2 802.30 UHBP-802.30 UHMC-802.3
• Channel 3 803.30 UHBP-803.30 UHMC-803.30
• Channel 4 804.88 UHBP-804.88 UHMC-804.88
• Channel 5 U5 - 794.90 UHBP-U5-794.90 UHMC-U5-794.90
• Channel 6 U6 - 797.50 UHBP-U6-797.50 UHMC-U6-797.50
• Channel 7 U7 - 796.30 UHBP-U7-796.30
UHMC-U7-796.30
• Channel 8
U8 - 798.80 UHBP-U8-798.80 UHMC-U8-798.80
• Channel 9
U9 - 804.90 UHBP-U9-804.90 UHMC-U9-804.90
U29 - 806.40 UHBP-U29-806.40 UHMC-U29-806.40
U30 - 809.60 UHBP-U30-809.60 UHMC-U30-809.60
U31 - 811.00 UHBP-U31-811.00 UHMC-U31-811.00
Multi-channel Systems
Following are groupings of frequencies suggested for multi-channel wireless systems.
• For use where TV channels 7, 9, 11 and/or 13 are operating: 8D-8M-8S-10C-10J-10W-12L-12S-12V
Traveling frequencies T2, T3 and/or T8 may be used with any of the above frequencies except for: 8D, 8M and 10C.
Interference may result from the use of these frequency combinations.
• For use where TV channels 8, 10 and/or 12 are operating: 7G-7I-9F-9Q-11G-11S-13Q or 7G-7I-9F-11G-11S-13B-13Q
Traveling frequencies T2, T3 and/or T8 may be used with any of the above frequencies with no interference problems.
CARVIN WIRELESS OPERATING FREQUENCIES AND REPLACEMENT PARTS
For future reference, please record your system information here (the serial numbers appear
inside the battery compartment of each transmitter, and on the bottom of each receiver):
Operating Frequency
Freq. Code____ ____ ____
Frequency____ ____ ____ • ____ ____ ____ MHz
Receiver
Model_________________
Serial Number____ ____ ____ ____ ____ ____ ____
Transmitter
Model_________________
Serial Number____ ____ ____ ____ ____ ____ ____
