CONGRATULATIONS
on your purchase of Carvin’s
RX800
,
RX1200
or
RX1200R
mixer!
The "
R
" version is a non-powered rack model designed for use with your own power amps while
the
RX800
and
RX1200
models include built-in high power amplifiers for direct hook-up to your
speakers. Please read this manual carefully to take advantage of the many features of your mixer.
SUPERB SOUND
is derived from the extremely low distortion, high "Headroom" design. A
state-of-the art, low noise, high headroom, balanced XLR preamp for each channel features a
common mode rejection of better than 78 dB, which means that any possible noise that may
come over your cables is virtually eliminated. Even the balanced XLR output connectors guard
your system from cable noise for professional recordings or external power amp connections.
Distortion is nearly non-existent with THD below .1%, which guarantees the purity of your sound.
Hear the difference - your sound will not seem "sterile" or "processed". It will be dynamically
open and transparent just like it was meant to be!
LIGHT WEIGHT and EASY TO USE
controls are logically laid out, making the RX Series
simple to use - quick adjustments can be made easily. Its compact size and weight of 30 lbs.
makes it the lightest, most powerful mixer of its kind. No other competitor in the industry offers
a higher performance to weight ratio!
4 HIGH CURRENT AMPLIFIERS
deliver 300 watts RMS each. A total of 600 watts is
delivered to your main speakers, plus two 300 watt amps to drive your stage monitors for a total
of 1200 watts. Speaker outputs feature both Twist-Lok and 1/4” jacks, delivering full power into
4 ohms, making these mixers more powerful than most amplifiers rated at 2 ohms. A peak indi-
cator for every amp and a protect LED gives you a visual monitor.
A HIGH CURRENT POWER SUPPLY
is provided by a beefy toroid transformer to assure
continuous high amperage DC voltage to all three power amplifiers, eliminating "overload" or shut-
down. 20,000 mfd capacitors offer a large power reservoir for bass thumping output.
The
RX1200R
features a 125k Hz switching power supply for operating your mixer at any volt-
age from 90 VAC to 240VAC. Like a laptop computer, you can go anywhere in the world and not
worry about power adapters.
2 INDEPENDENT 24-Bit STEREO DSP EFFECTS
allow you to independently
assign each channel to your choice of simultaneous effects. You can dedicate chorus/rev to the
acoustic guitar channel and reverb to the vocals, etc. Both effects are assignable to your stage
monitors so you can hear yourself with full effects. The effects processors feature 256 effects
each, including reverbs, choruses, flanging and echoes, with parameters fully adjustable for;
damping, decay, depth, speed, regeneration and time.
ACTIVE 3 BAND CHANNEL EQ
provides easy adjustment for the tone you want. The
LO frequency controls start at 20 Hz and continue through 80 Hz for a solid non-flabby bass. A
simple adjustment with the MID control gives you the best sound for vocals or guitar in the very
important 750Hz frequency range. The 11.5k Hz HI treble control adds sparkle to your top-end
without adding harshness. Both the LO and HI are "shelving", which means they are effective
from 20Hz up to 20k Hz.
FOUR 7 BAND EQUALIZERS
provide precise adjustments to fine tune your overall sound
and to help control feedback. Unlike one stereo graphic equalizer, four independent 7 bands give
you total control over each power amp output.
12340 World Trade Drive, San Diego, CA 92128
800.854.2235 www.carvin.com
76-01274A 0705
MODEL RX800, RX1200, RX1200R SPECIFICATIONS:
Frequency Response:
Mic or Line Inputs: 20Hz-20kHz ±1dB
Total Harmonic Distortion:
Less than .1% at nominal levels
Equivalent Input Noise:
150 ohm source: -117dBu
Output Noise:
-100dBu Master Line Out
(All Levels Minimum)
Output Headroom:
+10dB
Maximum Gain:
Mic in to Master Line Out: 50dB
Crosstalk:
Adjacent ch’s: -60db at 1KHz
Common Mode Rejection:
-78db at 1KHz
Phantom Power:
50 volts, XLR Mic channels
Channel EQ 3-band active:
LOW: 80Hz ±12dB
MID: 750Hz ±12dB
HI: 11.5KHz ±12dB
Power Output:
1200w @ 4
Ω
(8
Ω
:
200w x4, 4
Ω
: 300w x4)
Size and Weight:
RX800/RX1200: 8.75”H x 19”W x 8”D, 30 lbs.
with RoadWarrior case: 11”H x 21.5”W x 15.5”D, 50.5 lbs.
RX1200R: 8.75”H x 19”W x 8”D, 15 lbs.
Power Req.:
120VAC / 60 Hz or optional 240VAC / 50 Hz model
RX1200R Power Req.:
90-240 VAC / 50-60 Hz
Remote Effects Controller:
Optional FS22 footswitch
CARVIN ENGINEERING DATA
OPERATING MANUAL
RX800, RX1200, RX1200R MIXERS
DISTORTION-FREE LIMITERS
The purpose of a limiter is to hold down peaks so the amp won’t distort even with
extra hot input signals (this protects your expensive speakers). In addition, limiters
can increase your amp’s average output by 3 db or more. Part of Carvin’s design
uses the more expensive, distortion-free linear “opto isolators”. Unlike amps that use
FET controlled limiters which can inject small amounts of distortion, our limiters keep
your sound pure and uncolored!
ENGINEERED TO LAST
Every RX Series mixer is housed in a rugged rein-
forced steel rackmountable chassis. Continuous full power is assured from a 370 sq
inch, high-grade 6063-T5-aluminum heat sink cooled by a quiet variable speed fan.
You’ll never have to worry about protect or power reduction modes. Hidden deep in
the heart of these mixers is the “SMT” Surface Mount Technology construction that
utilizes surface mounted components to prevent parts from shaking or vibrating
loose. Sealed controls and switches guard against the outside elements while heavy-
duty connectors provide a positive connection to your cables. Fire retardant FR-4
military spec circuit boards feature double-sided copper construction to guard
against noise and radio frequencies (RF). Precision 1% tolerances guarantee that
your settings will be accurate every time. The RX Series is professionally made in the
USA for years of service!
RECEIVING INSPECTION—read before getting started
INSPECT YOUR AMP FOR ANY DAMAGE which may have occurred during shipping.
If any damage is found, please notify the shipping company and CARVIN immediately.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your
unit, always use the original carton and packing material. This will provide the best pos-
sible protection during shipment. CARVIN and the shipping company are not liable for
any damage caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been shipped sep-
arately. Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this man-
ual for your records. Keep your portion of the card and return the portion with your
name and comments to us.
USA customers register online at:
www.carvin.com/registration
All other countries register online at:
www.carvinworld.com/registration
For your records, you may wish to record the following information.
Serial No._____________________ Invoice Date_______________
RX1200 in Road Warrior Case
