19
2) Electrical safety
a) The electric power tool’s connecting plug must
fit the power outlet. The plug must not be modi-
fied in any way. Do not use any adapter plugs in
combination with earthed electric power tools.
Unmodified plugs and power outlets that fit reduce
the risk of an electric shock.
b) Avoid physical contact with earthed surfaces
such as pipes, heating systems, cookers and refri-
gerators.
There is a higher risk of an electric shock if
your body is earthed.
c) Keep electric power tools dry and out of the
rain.
There is a higher risk of electric shock if water is
allowed to enter the electric power tool.
d) Du not misuse the cable to carry or hang up
the electric power tool or to pull the plug from
the power outlet, for example. Keep the cable
away from heat sources, oil, sharp edges or mo-
ving equipment parts.
Damaged or tangled cables
increase the risk of an electric shock.
e) When working outside with an electric power
tool, only use extension leads that are suitable
for use outdoors.
The use of an extension lead sui-
table for outdoor use reduces the risk of an electric
shock.
f) If it is absolutely necessary to operate the
electric power tool in a damp environment, use
a fault current breaker.
The use of a fault current
breaker reduces the risk of an electric shock.
3) Safety of persons
a) Be attentive, watch what you are doing and
take the utmost care when working with an elec-
tric power tool. Do not use an electric power tool
if you are tired or under the influence of drugs,
alcohol or medication.
One moment of inattentive-
ness when using the electric power tool may cause
serious injuries.
b) Always were personal safety equipment and
protective goggles.
Wearing personal safety
equipment, such as dust mask, non-slip safety shoes,
safety helmet or hearing protection, depending on
the type of the electric power tool reduces the risk
of injuries.
c) Take measures to prevent unintended opera-
tion. Makes sure that the electric power tool is
switched off before you connect it to the power
supply, pick it up or carry it.
Leaving your finger on
the switch when carrying the electric power tool or
connect it to the power supply while it is switched
on may cause accidents.
d) Remove adjusting tools or spanners before
switching on the electric power tool.
A tool or key
left in a rotating part of the device can cause injuries.
e) Avoid unnatural postures. Make sure you are in
a stable standing position and keep your balance
at all times.
This will enable you to keep the electric
power tool under better control should an unexpec-
ted situation arise.
f) Wear suitable clothing. Do not wear any loose
clothing or jewellery. Keep your hair, clothing
and gloves away from moving parts.
Loose
clothing, jewellery or long hair may get caught in
moving parts.
g) If dust extractor and collection systems
can be mounted, make sure that they are
connected and are used properly.
Use of a dust
extractor system can reduce the hazards caused by
dust.
4) Use and treatment of the electric power tool
a) Do not cause the device to overload. Use the
electric power tool designed for your job.
You
work better and safer in the specified performance
range with the appropriate tool.
b) Never use a electric power tool with a defecti-
ve switch.
A power tool that can no longer be swit-
ched on or off is dangerous and must be repaired.
c) Unplug the power plug from the power outlet
before making adjustments to the device, exch-
anging accessories or putting the device to one
side.
These precautions make sure that the electric
power tool does not start up unintentionally.
d) Keep electric power tools that are not in use
out of the reach of children. Do not let anyone
use the device who is not familiar with it or who
has not read these instructions.
Electric power
tools are dangerous when used by inexperienced
persons.