Cartoni P70 PLUS Скачать руководство пользователя страница 5

E

ND USER

S MANUAL

 

P70

 

PLUS

 

PEDESTAL

        

         

 

 

 

Rev.2 – 10/2016   

 

 

 

 

 

 

 

 

5/18 

 

1. 

 

  

 

P

REFACE

 

The present manual relates to the camera 

support 

P70 PLUS Pedestal

The Pedestal  can only operate properly 

and safely if it is used exactly as prescribed 
in the present manual and in the other docu-
mentation  relevant to  the  P70 PLUS  Pedes-
tal. 

It is therefore essential to read all the said 

documentation  carefully and to keep it in a 
safe place. 

Always make sure that anyone required to 

operate the pedestal has fully understood all 
instructions and regulations governing its use 
as well as all the symbols and controls on the 
machine. 

Although the equipment  features  safety 

devices, not all the risks inherent its im-
proper use can be avoided. 

Cartoni S.p.A

 

therefore accepts no responsibility for dam-
age to persons or property deriving from im-
proper use of the equipment. 

 

WARNING!

  Do not  remove or erase 

any label, indication or warning  af-
fixed to the Pedestal. 

 

WARNING!

  Any modification  to the 

pedestal and/or its accessories require 
prior authorisation by 

Cartoni S.p.A.

 

1.1.

     

 

F

URTHER INFORMATION

 

For a more detailed description of the 

components please refer to the exploded 
views of the equipment available from Car-
toni S.p.A. and its authorized resellers.  

1.2.

     

 

W

ARRANTY

 

The  P70 PLUS  Pedestal is covered by a 

warranty against manufacturing defects for 5 
years from the date of shipment (three years 
basic wa two years upon online reg-
istration to www.cartoni.com). 

The warranty covers replacement  of any 

defective parts and the labour required for 
the purpose; it is the client’s responsibility to 
bring any product requiring repair to the 

Car-

toni S.p.A.

  factory  office in Rome or to  a 

Cartoni authorized service centre. 

If it is merely a matter  of replacing indi-

vidual components, these will be supplied 
free of charge from  the 

Cartoni S.p.A. 

fac-

tory. Transport costs will be charged to the 
client. The present warranty is only valid if 
the pedestal has been properly used in accor-
dance with the manufacturer’s instructions 
and has not been mishandled. Cartoni S.p.A 
immediately invalidates the warranty if 
modifications and/or repairs are carried out 
by persons not authorised to do so

.

 

Components subject to wear and tear are 

not covered by the warranty. 

The warranty is also invalidated by one of 

the following: 

    

failure to comply with payment condi-

tions; 

    

failure to carry out appropriate main-

tenance; 

    

removal or mistreatment of plates 

and/or labels containing data and techni-
cal specifications. 

The warranty absolves 

Cartoni S.p.A.

  of 

all responsibility for any direct or indirect 
damage deriving from the  equipment  mal-
function. 

Cartoni S.p.A.

  accepts no responsibility 

for damage to the pedestal caused by im-
proper use or the malfunction of other 
equipment connected to the camera support. 

The warranty only covers the Pedestal 

damage and/or malfunction and does not en-
title the Purchaser to claim any damages for 
loss of production time due to assumed or 
proven damage caused  by and/or connected 
to the pedestal itself. 

The present warranty forms an integral 

part of the sales contract and is included into 
the selling price of the machine. 

Содержание P70 PLUS



















Отзывы: