background image

10

5. m

aIntenance

6. W

arranty

When needed, with indoor use just clean the Head and Tripod with a 

soft cloth. Dirt accumulated during storage may be removed using a brush 
or Air spray. 

CARTONI

 products main mechanisms are sealed as they are also built 

for professional outdoor use. 

However, use under rough conditions they will require special care. Salt 

water is very corrosive and can cause extreme damages. In attempt to avoid 
further damage the Fluid Head should be washed off with fresh water at 
the earliest opportunity and perfectly dried before storage. 

Sand  and  dirt  are  abrasive  and  should  be  removed  using  a  semi-stiff 

brush or Air spray. 

Disconnect the illuminated display & bubble level battery during long 

term storage; for battery replacement access the battery compartment (6).

All 

CARTONI

 Fluid Heads & Pedestals have a free of charge three (3) 

year warranty. Register your product at www.cartoni.com within 30 days 
from date of first purchase/invoice to receive further two (2) year warranty 
for the unsurpassed free five (5) year warranty. 

Tripods, spreaders, dollies and all accessories are guaranteed one (1) 

year from the date of first purchase/invoice. 

CARTONI

 warrant that the product supplied will - under proper use - 

be free from defects in workmanship and materials and agrees that it will, 

Содержание MASTER 65













Отзывы: