Cartoni Malibu 540 2014 Скачать руководство пользователя страница 38

Страница: 38 / 136

110-0001-04EN

While driving

4.4

Seats

4.4.1

Driver’s seat and passenger seat

→

Turn all swivel seats in the direction of travel and lock in place. These must

remain locked when driving, turning them is forbidden.

Adjusting the seat

Seat longitudinal adjustment

Armrest adjustment

Backrest adjustment

Swivelling the seat

Height adjustment, front

Height adjustment, back

Fig. 4

Adjusting the seat

Move the driver’s seat and passenger seat into the driving position:

1. Fold up both armrests.
2. Push the

driver’s seat /

passenger seat to the back or in the middle posi-

tion.

Press the lever (Fig. 4, Pos. 4) upwards.

4. Turn the seat in the direction of travel and lock in place.

Setting the armrest:

The height of the armrest can be adjusted infinitely.

Turn the knurled wheel (Fig. 4, Pos. 2) counter-clockwise. The locking

mechanism of the armrest released doing this.

2. Move the armrest into the desired position.
3. Turn the knurled wheel clockwise to the stop.

→ Further details for operating / adjusting the driver and passenger seats can

be found in the instructions of the vehicle manufacturer in this vehicle.

Содержание Malibu 540 2014









































































































































Результаты поиска

Содержание Malibu 540 2014

Отзывы:

Похожие инструкции для Malibu 540 2014

Бренды по названию

Популярные бренды

Cartoni Malibu 540 2014, Руководство пользователя

Результаты поиска

Содержание Malibu 540 2014

Отзывы:

Похожие инструкции для Malibu 540 2014

Бренды по названию

Популярные бренды