Cartoni LAMBDA 50, Руководство пользователя / Техническое обслуживание

Страница: 10 / 12

10
7. c
AMerA
s
et
-u
p wItH
3
rd
AxIs
• To release the Camera plate (4) pull down safety knob (5), unlock knob (6) and disengage the
Camera plate.
• Lock the spin lock lever (8) the pan lock lever (12) and the tilt lock lever (13).
• Attach the Camera plate under the Camera assembly and firmly secure it with both screws.
• Slide the Camera in place on the sliding base (10) and lock the knob (6).
• Set the
LAMBDA 50 main horizontal slide (14) and main vertical slide (15) at maximum ex-
tension in order to prevent the Camera and its accessories to interfere with the LAMBDA 50
frame during the 360° movement. Operate the pan lock lever (12) and tilt lock lever (13) to
lock and unlock.
• Set the Camera position by the turning wheel (9) and secure it with the Camera plate control
knob (7). The Camera should move freely 360° on the roll Axis.
• Crank up or down the slide (10) to line up the rotation shaft of the control wheel (1) with the
position of the Camera center of gravity (CG) (vertical Axis).
• Unlock the knob (6) and slide the Camera in place on the sliding base (10), to line up the ro-
tation shaft of the control wheel (1) with the position of the Camera center of gravity (CG)
(horizontal axis).
• The Camera is most probably out of balance so we have to correct the center of gravity (CG) of
the entire system. Fix one or two counterbalance rods with weights to the rosette; adjust the
angular position of the rod and weight position, until you fit the Camera in balance.
• This operation can require several fine tuning attempts, so please see the video at
www.cartoni.com/products/fluid-heads/fluid-heads-sfx/hl5000ta-lambda50-third-axis/.
• Unlock the spin lock lever (8), the pan lock lever (12) and the tilt lock lever (13).
• The Camera has to be balanced and has to rotate 360° operating the control wheel (1) for roll
rotation and the main pan bar (16) for pan and tilt rotation.
8. 3
rd
AxIs - s
pecIfIcAtIons
Minimum payload 0 Kg 0 lbs
Maximum payload 40 Kg 88 lbs
Weight 15,5 Kg 34.2 lbs
Bowl diameter Plate
Fluid control 7 steps + 0
Counterbalance 0
Pan range 360°
Tilt range 360°
Temperature range - 40 / + 60 °C - 40 / +140 °F