Cartoni Focus 8, Руководство пользователя / Техническое обслуживание

Страница: 8 / 12

8
Place the FOCUS 8 on your Tripod by loosening the tie-down knob (1)
under the Fluid Head and level using the level bubble (7).
Connect the Pan bar (3) to the Fluid Head tightening the lever (4) on
the Pan bar attachment and select your desired operating angle. The
telescopic Pan bar length can be adjusted via lever (5).
Lock both Pan and Tilt brakes (2 and 6), turn both Tilt drag selector
(13) and counterbalance knob (12) to the minimum level.
Unscrew the Camera plate lock (9) and press the safety lock (10) to
slide out the Camera plate (11).
Attach the Camera plate (11) to the bottom of the Camera and tighten
the clamping screw to secure the Camera. Try to center the Camera
plate under the Camera, keeping the center of gravity position in mind.
Slide in the Camera plate until you hear the safety button click. Lock
the Camera plate with knob (9).
Hold the Camera in horizontal position with the Pan bar (3) and re-
lease the Tilt brake lever (2). Release the Camera plate lock (9) and
find the correct center of gravity (CG) position, by sliding the Camera
back and forth until you have achieved the correct balance. Lock the
sliding plate lock (9).
Set the counterbalance system by turning the balance knob (12), to
the appropriate tension. The Camera has to to stay still at any Tilt an-
gle. If needed, fine-tune by adjusting the sliding Camera plate.
3. p
rocedUreS