Cartoni FOCUS 22, Руководство пользователя / Техническое обслуживание

Страница: 8 / 12

8
Place the FOCUS 22 on your Tripod by loosening the tie-down knob
(8) under the Fluid Head and level using the illuminated spirit level
(14). In low light conditions, press button for light.
Connect the Pan bar (16) to the Fluid Head tightening the lever (3) on
the Pan bar attachment and select your desired operating angle. The
telescopic Pan bar length can be adjusted via lever (4).
Lock both Pan and Tilt brakes (6 & 7), turn both Tilt drag selector (13)
and Counterbalance knob (15) to the minimum.
Open the Camera plate release lever (10) completely to release the
Camera plate (1).
Remove the Camera plate (1) from the sliding Camera platform (2)
by squeezing simultaneously Camera plate release lever (10) and the
safety button (11). Attach the Camera plate (1) to the bottom of the
Camera and tighten the clamping screw to secure the Camera. Try to
center the Camera plate on the Camera, keeping the center of gravity
(CG) position in mind.
Lock the sliding platform lever (12), click the Camera into the quick
release sliding platform (2), the plate will lock into place.
Hold the Camera in horizontal position with the Pan bar (16) and re-
lease the Tilt brake lever (7). Release the sliding platform lever (12) and
find the correct center of gravity (CG) position, by sliding the Camera
platform (2) back and forth until you have achieved the correct bal-
ance. Lock the sliding platform lock (12).
3. p
rocedUreS