3. Take NVR which support ONVIF to add devices
Take NVR which support ONVIF to add ptz, the main attention is the ONVIF port,
user name and password these three items are to be kept consistent. PTZ ONVIF
port can be seen on the IE Figure:
Mark: the IP address of the NVR and the PTZ camera should be in the same LAN.
4. Set the ptz camera preset
Take IE interface for example: after you enter into the zoom camera page in the IE
interface,click”PTZ control” on the left then will appear the direction key of controlling
ptz, Figure:Operate the ptz run to the location where you want to set preset, then
click the ptz function on the left, select the preset value you want to set, then click
set to finish. Figure:
