Configuration 2 - Speed Alert Pattern:
On entering Configuration Menu 2, the LEDs will demonstrate the current selected Speed Alert pattern.
Subsequent quick presses of the pushbutton will cycle through each of the 6 available Speed Alert Patterns
below:
Pattern 1 - Linear
Pattern 2 - Linear
Pattern 3 - Linear
Pattern 4 - Linear
Pattern 5 - Converging
Pattern 6 - Converging
Once you have chosen your Speed Alert Pattern then refer back to
Note 1
to either exit configuration or move
onto the next Configuration Menu.
SPEED ALERT (OBD2)
3
Configuration 1 - Brightness:
There are two adjustable brightness levels which allows the Speed Alert to be run in a Day brightness mode
or Night brightness mode. To toggle between the two brightness levels press the rear button momentarily.
Four LEDs will light up momentarily on the left if you are in Day mode, and 4 LEDs will light up momentarily
on the right if you are in Night mode. To adjust either brightness setting, enter Configuration Menu 1 by
pressing and holding the rear button for 4 seconds. Release the button when the first LED has lit up. Four
white LEDs on the left will now be displayed indicating you are in Day mode. A single press of the rear button
will change this brightness level ( 9 to choose from). Once you are happy with the brightness level press and
hold the rear button for 4 seconds until 4 white LEDs on the right light up. You are now in Night mode. Once
you have chosen your brightness levels then refer back to Note 1 to either exit configuration or move onto
the next Configuration Menu.
Brightness Level 1
(Default brightness = Max)
Brightness Level 2
(Default brightness = Half)
