Installation and operation
Installation, Operation & Maintenance of the Wireless Sensing Family
25
Figure 16: Dashboard USG unit
3.4.3
R-sensor installation
The R-sensor is easily installed using a dual sided adhesive.
CartaSense recommends to use 3M VHB (4957F).
For disassembly option, use of 3M Dual Lock re-closable fasteners tape is
recommended
3.4.4
Mounting the M-Sensor:
The M-sensor has several mounting options
Holder:
o
Wall mount holder – as shown in Figure 17
o
Pole mount holder.
Adhesive – use 3M Dual Lock
TM
reclosable fastener
Figure 17: M-sensor holder
The USG can operate for about 9 hours with an internal battery.
If the YELLOW LED (5) blinks
at the rate of
one second,
connect the USG to Power
source (AC/DC adapter or DC source).
