Page 18 of 25
•
Go into Program Mode.
•
To adjust the caddy to the left, press left button
once. Or to adjust the caddy to the right press the
right button once. Two button presses adjusts the
tracking about one foot to either side in a 25-‐foot
run.
•
To save the setting, push the Parking Brake button.
•
Test the caddy to see if you need further adjustment.
Repeat as needed.
4.
Return all Programing back to Original Factory
Settings.
•
Go into Program Mode.
•
Press the reverse button to stop the caddy.
•
Press 1,3,4,2 then the parking brake button. Your
caddy should be at factory settings.
5.
Matching a “New Remote Transmitter” to your caddy.
Should you need to replace your remote transmitter, you
will need to pair (match) it to your GRX-‐1250 LI. (NO
need to go into program mode.)
•
With the caddy on (solid green LED), and the
Remote Transmitter on, plug the USB cable into the
USB port under the receiver dome. Plug the other
end of the cable into the port on the remote
transmitter.
•
The LED on your
remote will slowly
flash.
•
Press and hold the
on/off button
on
the caddy
. The
remote transmitter
