11
CARSON Helikopter TRIPLE TWO Business 500 50 7030
GB
Included in the scope of delivery is a remote control
transmitter with two remote control levers, which are assigned
the two respective functions.
These functions are activated by the movements forwards /
backwards and right / left.
AA X 8 batteries are required for the
transmitter (not included)
Put the charged batteries in the battery compartment of the
transmitter.
Pay attention to the correct polarity!
c. Four channel remote control transmitter
Pitch (Lift)
Tail (Rudder)
Trim lever nick
ON/OFF switch
Telescopic antenna
Functions on the back of the transmitter:
• Charging
socket
• Battery chamber
Trim lever roll
Roll (Ailerons)
Nick (Elevators)
Trim lever pitch
Trim lever tail
Transmitter crystal
4 Reverse switch for tail rotor
3 Reverse switch for acceleration
2 Reverse switch for pitch
1 Reverse switch for roll
Servo reverse switches to change the reaction
direction.
Dual rotor blades‘ speed adjustment via
PCB control
Warning!!! Please work very carefully, applying minimal
pressure and using a small screw driver.
1. Function of button: adjust upper and lower rotor blades‘
different speed.
a. Turning the button clockwise, upper rotor blade runs
faster and helicopter turns left.
b. Turning the button anti-clockwise, lower rotor blade runs
faster and helicopter turns right.
2. The “PCB CONTROL” is properly adjusted when the
helicopter no longer drifts in any direction.
Receiver plug tail
rotor function
Receiver plug
accelerator
Adjusting screw